Description

Open End Anti‑Static Poly Bags – 6″ x 10″ , 2 Mil Pink

Reliable ESD protection for motherboards and sensitive electronics

When you ship, handle, or store a computer motherboard, every inch of the board is vulnerable to electrostatic discharge (ESD). A single spark can destroy traces, chips, and connectors – often without visible damage. ZXCOOL’s Open End Anti‑Static Poly Bags are specifically sized (6×10 inches) to fit standard motherboards, mini‑ITX, and other large PCBs, providing a protective pink barrier against static buildup.

These bags are made from low‑charging polyethylene with a special anti‑static coating, then formed into a 2 mil thickness that balances puncture resistance with flexibility. The open‑top design allows you to insert the board easily, then seal with tape, a heat sealer, or simply fold the top over for temporary storage.

✅ Stock size: 6 × 10″ (fits many motherboards up to mini‑ATX)
✅ Custom sizes, thicknesses, and printed ESD warnings available

Why Choose ZXCOOL Open End Anti‑Static Bags?

🔹 Special Coated for Effective Charge Dissipation

Our pink anti‑static bags are treated with a proprietary coating that actively dissipates electrostatic charges. Unlike ordinary poly bags that can generate static when rubbed, these bags:

• Prevent triboelectric charging (friction‑induced static)

• Safely drain any existing charges to ground

• Keep the internal environment ESD‑safe

The result: your motherboards, RAM, CPUs, and expansion cards remain fully protected during every stage of logistics.

🔹 Electrostatic Discharge (ESD) Protection – Certified Performance

ESD is one of the leading causes of hidden field failures in electronics. These bags are designed specifically to prevent ESD damage during:

• Shipping – vibration and movement inside a carton can generate static

• Handling – workers picking up bags can create charges

• Storage – long‑term inventory in non‑ESD environments

Whether you are an OEM, a repair shop, or a PC builder, our open end bags give you peace of mind.

🔹 Low‑Charging Polyethylene Material

The bags are manufactured from low‑charging polyethylene – a material that inherently resists static generation. Key properties:

This makes them far superior to standard poly bags for electronics protection.

🔹 Sturdy 2 Mil Thickness – Resilient & Reliable

At 0.002 inches (2 mil) , these bags are:

• Thick enough to protect against minor punctures from board corners, standoffs, and solder points

• Thin enough to be easily folded or sealed without stiffness

• Clear pink – you can see the board silhouette while still having ESD identification

The open end design allows you to insert the motherboard smoothly, then close the bag using:

• Poly bag tape – quick and reusable

• Impulse heat sealer – tamper‑evident seal

• Fold + tape – no tool needed

• Twist ties or clips – temporary closure

Even with repeated access, the bag remains intact and functional.

Perfect Fit for Motherboards – 6″ x 10″ Size

For Micro‑ATX or full ATX boards, we offer custom sizes (e.g., 10×12″, 12×13″, etc.) – see customization section below.

Technical Specifications

Common Applications

These bags are also widely used for document storage, photo protection, and small parts organization thanks to the see‑through pink film.

Customization – Get Exactly What You Need

ZXCOOL offers full customization for open end anti‑static bags:

• Any width & length – from 2×2″ up to 48×48″

• Any thickness – 1 mil to 6 mil (2 mil is standard for motherboards)

• Gusseted open end – add bottom gusset for extra capacity

• Printed ESD logo – “CAUTION – ESD SENSITIVE” or your own design

• Clear open end bags – same coating, transparent film

📦 MOQ for stock size (6×10″): 100 pieces
📦 MOQ for custom dimensions: 500 pieces
📦 MOQ for printed bags: 5,000 pieces (no tooling fee for simple text)

➡️ Request a custom quote – tell us your required size, thickness, and any printing needs.

FAQ – Open End Anti‑Static Poly Bags

1. What does “open end” mean?
Open end means the bag has no zipper or built‑in closure. It is a flat, open‑top bag. You close it using tape, heat sealer, or folding. This gives you flexibility and lower cost compared to reclosable bags.

2. Can I use these bags for standard ATX motherboards?
A 6×10″ bag is designed for mini‑ITX and smaller boards. For full ATX (12×9.6″), please request a custom size such as 12×13″ or 13×14″. We can produce any size.

3. Is the anti‑static coating permanent?
Yes. The coating is integrated into the polyethylene film and will not wash off or degrade under normal use. The bag remains ESD‑protective for its entire service life.

4. Can I reopen and reseal the bag multiple times?
Yes. If you use tape or a fold‑over clip, you can open and close the bag repeatedly. For heat‑sealed bags, you would need to cut the seal and then reseal with tape or a new heat seal.

5. Are these bags moisture‑proof?
They resist light moisture and humidity but are not rated as moisture‑vapor barrier bags. For moisture‑sensitive devices (MSD Level 3+), consider our static‑shielding moisture barrier bags.

6. What is the lead time for custom 6×10″?
Stock 6×10″ ships within 2 business days. Custom sizes (including larger motherboard sizes) typically take 7–12 working days.

Why Choose ZXCOOL for Open End Anti‑Static Bags?

• Factory direct pricing – save 20–30% versus distributors

• Virgin material + coating – consistent static decay performance

• Tested in‑house – each batch checked for resistivity

• Low MOQ for custom – we help small and medium businesses

• Fast global shipping – warehouses in USA and Asia